Development and Application of Compound Cycle Commands for Rectangular Slot Milling
严霞① YAN Xia；刘斌② LIU Bin
（①昆山登云科技职业学院，昆山 215300；
②江苏省吴中中等专业学校，苏州 215104）
（①Kunshan Dengyun College of Science and Technology，Kunshan 215300，China；
②Wuzhong Secondary Vocational School，Suzhou 215104，China）
摘要： 对矩形槽铣削加工走刀路径进行优化，对矩形旋转任意角度后各基点坐标进行计算，设计宏程序，并对相关系统参数的设定进行了介绍。经实例验证，能明显降低编程难度，有效缩短编程时间。
Abstract: The tool path for milling of rectangular grooves is optimized, the coordinates of each base point after the rectangle is rotated at any angle are calculated, the macro program is designed, and the setting of relevant system parameters is introduced. Verified by examples, it can significantly reduce the programming difficulty and effectively shorten the programming time.
关键词： 矩形槽；宏程序；变量；系统参数
Key words: rectangular slot；macro program；variable；system parameter
中图分类号：TG54 文献标识码：A 文章编号：1006-4311（2022）22-124-03
DOI:10.3969/j.issn.1006-4311.2022.22.041.
文章出处：严霞,刘斌. 矩形槽铣削加工复合循环指令开发与应用[J]. 价值工程,2022,41(22):124-126.
|
