Automatic Feeding and Leveling of Chemical Product Drying Line
申建军①SHEN Jian-jun;孟龙① MENG Long;郑梦阳①ZHENG Meng-yang;
凌菱①LING Ling;米艳敏②MI Yan-min;李军安②Ll Jun-an
①黄河交通学院,焦作 454950;
②新乡市精诚石化有限公司,新乡453002
①Huanghe Jiaotong University ,Jiaozuo 454950,China;
②Xinxiang Jingcheng Petrochemical Co.,Ltd.,Xinxiang 453002,China
摘要;为了解决烘干线进料口处料厚不均匀而需要人工干预的问题,在充分调研现场、产品和已有设备状况的基础上,分析比较了几种可行的方案以后,通过类比实验,做出了材料、制造和使用成本最低的,即经济性最好的——使用滑道加分流器的解决方案,经技术和生产人员的审核,认为该方案的性价比高且可行。具体实施后,不仅能够实现烘干线进料口处物料自动摊平,从而保证产品的烘干质量和产量;而且节省了每年42,000元的人工费用。
Abstract: In onder to solve the problem of uneven material thickness at the feeding port of drying line and the need for mamualintervention, on the basis of full investigation of the site, products and existing equipment, after analyzing and comparing several feasibleschemes, through the analogy experimenl, we make the lowest material, manufacturing and use cost, namely the best economic solution:using slide and slider shunt. After the examination of technical and production personnel,it is considered that the scheme is cost-efiectiveand feasible. After the implementation, it can not only realize the automatic amortization of the material at the feeding port of the dryingline, so as to ensure the drying quality and output of the product. And save the anual labor costs of 42,000 yuan.
关键词:产品烘干线;进料摊平;自动化;设计
Key words: product drying line; material at the feeding port flatting; automation; design
价值工程-文章出处：申建军,孟龙,郑梦阳，等.化工产品烘干线进料摊平自动化[J].价值工程,2023,42(21):58-60.
|
